Date:
July 19, 21
Previously, I delivered an article about fastener sales,
Another important business of nano-precision is material sales.
Fortune Cross, a polishing shaft, supplies materials to cutting subcontractors for a fee.
Since it is purchased from the manufacturer in batches of several hundred tons every month,
It has a good reputation for price competitiveness due to its economies of scale.
If anything, the handling of Japanese materials is small
The handling of Indian materials is increasing in Taiwan, China, Malaysia, Vietnam, and some parts.
Of course, we also deal with local pull-out manufacturers and trading companies, so please leave quality and delivery date management to us.
Shape: Coil and bar material
Outer diameter: 1 mm to 25.4 mm
Material: Iron, Free-cutting steel, Chromoly steel: S45C, SUJ-2, SCM415 SUM24
Stainless steel: SUS303 / Cu, SUS304 / H, SUS316, SUS420J2, SUS420F, SUS430 3CR13 / 4CR13 etc
Etc. are flowing well. (It is a so-called trading company regarding materials)
In the world of materials, there are many manufacturers including long-established companies and start-up companies.
The Chinese, who used to be synonymous with cheap and bad
It is rapidly growing to increase the technical capabilities to weapons rich demand and scale of the superiority of the inland.
For this reason, we will actively try to deal with potential new manufacturers.
The manufacturer's ability value and usability
I don't know until I get along with them to some extent, but after trying and making errors
We will select business partners while looking at the QCD "quality, cost, delivery date" of each manufacturer.
At the manufacturing site, the ratio of material costs to the unit price of products is not small.
In the end, there are many situations where you decide to hire based on cost competition while ensuring the minimum quality required.
If you have any problems with materials,
First of all, please check nano-precision (as a comparative study) from the phase estimate.
It may be useful for something.
Then, let's make this week a wonderful week ♪
Click here for back numbers [O-ring image inspection articles] ☆ 彡
For inquiries, please contact here ↓
*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*
Company name: Nano Seimitsu Co., Ltd
Address: 162 Moo 17 Bangplee Industrial Estate Sio3, Debaratana Rd.,
Bangsaothong, Samutprakarn 10570 Thailand
Yada Mobile: +66 (0) 61-572-1700 (Japanese direct)
Email: yada@fortune-cross.com
*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*
Another important business of nano-precision is material sales.
Fortune Cross, a polishing shaft, supplies materials to cutting subcontractors for a fee.
Since it is purchased from the manufacturer in batches of several hundred tons every month,
It has a good reputation for price competitiveness due to its economies of scale.
If anything, the handling of Japanese materials is small
The handling of Indian materials is increasing in Taiwan, China, Malaysia, Vietnam, and some parts.
Of course, we also deal with local pull-out manufacturers and trading companies, so please leave quality and delivery date management to us.
Shape: Coil and bar material
Outer diameter: 1 mm to 25.4 mm
Material: Iron, Free-cutting steel, Chromoly steel: S45C, SUJ-2, SCM415 SUM24
Stainless steel: SUS303 / Cu, SUS304 / H, SUS316, SUS420J2, SUS420F, SUS430 3CR13 / 4CR13 etc
Etc. are flowing well. (It is a so-called trading company regarding materials)
In the world of materials, there are many manufacturers including long-established companies and start-up companies.
The Chinese, who used to be synonymous with cheap and bad
It is rapidly growing to increase the technical capabilities to weapons rich demand and scale of the superiority of the inland.
For this reason, we will actively try to deal with potential new manufacturers.
The manufacturer's ability value and usability
I don't know until I get along with them to some extent, but after trying and making errors
We will select business partners while looking at the QCD "quality, cost, delivery date" of each manufacturer.
At the manufacturing site, the ratio of material costs to the unit price of products is not small.
In the end, there are many situations where you decide to hire based on cost competition while ensuring the minimum quality required.
If you have any problems with materials,
First of all, please check nano-precision (as a comparative study) from the phase estimate.
It may be useful for something.
Then, let's make this week a wonderful week ♪
Click here for back numbers [O-ring image inspection articles] ☆ 彡
For inquiries, please contact here ↓
*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*
Company name: Nano Seimitsu Co., Ltd
Address: 162 Moo 17 Bangplee Industrial Estate Sio3, Debaratana Rd.,
Bangsaothong, Samutprakarn 10570 Thailand
Yada Mobile: +66 (0) 61-572-1700 (Japanese direct)
Email: yada@fortune-cross.com
*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*━*